How to remove bootloader unlock warning on Moto G4 Plus

In this detailed tutorial we are going to show the step by step process to remove bootloader unlock warning generated after unlocking bootloader on your Moto G4 Plus. The warning message can be seen on every reboot or when you switch on the device, this warning message seen pretty annoying that you have committed a serious crime of unlocking bootloader. But now you can remove it easily in just a matter of seconds, all you need is to flash the stock logo.bin file that will replace the warning message with the stock Moto G4 Plus logo.

Just follow the below guide to install the Stock Moto G4 Plus logo and remove the bootloader unlock warning on your device.

How to remove bootloader unlock warning on Moto G4 Plus

Before you begin:

Disclaimer: This guide includes flashing system file and other operations on your device. The writer is not responsible for any damage happens to your device during the whole operation neither we are forcing you to perform such operation. 

Create a Backup of your device

Backup is the most necessary part for your device, so we recommend you to create a secure backup of your data. Click here to make Nandroid backup of your device

Early Preparations:

Keep your battery charged or at least your device should contain at least 80% charge before the flashing operation.

Android USB drivers for your device should be installed on your PC, or you can download USB drivers for Motorola

Enable USB debugging and check the Allow Mock Locations option too. To enable USB debugging in your device go to Setting >> Developer options >> USB debugging. USB debugging is meant for the development purpose hence it will ask you for the confirmation so tap OK to confirm.

Sometimes “Developer options” are not visible in device settings menu, so what you need to do is, go to Settings >> About device >> Software information and there you will see an option build number. Tap it 7 times until a pop up arises with a message that you are now a developer, that’s it now go back and the Developers option is visible in the settings menu.

Set up ADB and Fastboot

Process to remove bootloader unlock warning on Moto G4 Plus

Just follow the steps to remove bootloader unlock warning on Moto G4 Plus

Download the file from the link provided below and extract it, you will get a logo.bin file.

Now what you need to do is connect your device to PC using USB cable.

Open the folder where you have downloaded or placed logo.bin file.


Now inside the same folder press and hold SHIFT + Right-Click together and Right click on any empty space inside the folder and click on “Open command window here” as shown in the above pic.

A black command window will appear, now type the following command to reboot your device into fastboot/bootloader mode.

“adb reboot bootloader”

Once your device boots into fastboot mode now type the following command to flash the logo.bin file

“fastboot flash logo logo.bin”

The above command will flash the stock logo of Moto G4 Plus on your device now enter the below command to reboot your device.

“fastboot reboot”

On reboot the warning messages will be removed.

Download Moto G4 Plus Logo

That’s it! You have successfully removed bootloader unlock warning on Moto G4 Plus. If you have any query feel free to contact us and please give us +1 or Like to say thanks.

We will be happy to hear your thoughts

Leave a reply